Apart from iron, aluminium is currently the next most widely used metal in the world. This is due to the fact that aluminium has a unique combination of attractive properties, such as its low weight, corrosion resistance, and easy maintenance of final product, have ensured that this metal and its alloys will be in use for a very long time.
Aluminium 8011 alloy is a wrought alloy.
We offer high quality Aluminium Sheets for general engineering applications.
- Roofing & Cladding,
- Rolling shutters,
- Facade & Awnings,
- Interior ceilings,
- Transportation Vehicles etc.
Indicative minimum bend radii for 90° cold forming for various thickness, t mm:
Welding 8011 is readily weldable by standard techniques. It is frequently welded with GTAW (TIG) or GMAW (MIG). Aluminium must be very dry & clean to avoid contamination & porosity of the weld. Filler metals 1100, 4043 or 4047 are used. 4043 is the most crack tolerant. Best colour match is obtained with 1188 filler metal. Shielding gas must be dry & free of hydrogen.
Aluminium 8011 is readily machinable by conventional methods. It should be machined at high speed with copious lubrication to avoid thermal distortion of the workpiece. Sharp tools are essential. High speed steel or tungsten carbide may be used. Cuts should be deep and continuous, with high cutting speeds.
Woodworking machinery may be suitable for short runs.
Aluminium 8011 is annealed at 345°C, time at temperature and cooling rate are unimportant. Stress relief is rarely required, but can be carried out at about 220°C. If loss of strength is of concern, stress relief tests should be conducted.
Fabrication aluminium 8011 is not generally hot worked. It is readily cold formable in the annealed condition, as it is a relatively soft and ductile alloy. Forming loads and tool & press wear are generally less than with carbon steel. For piercing and blanking the punch to die clearance should be about 6% of the thickness per side for the H32 & H34 tempers. Sharp tools are required.